Back SearchTitle: INFLUENCE OF WATER PRESENT IN SILICONE DIOXIDE ON THE PROPERTIES OF RUBBER BLENDS
Page Range: p. T/1-4
Author(s): Ivanov M T; Ezekieva M M
File size:
Download the pdf (subscribers only)
Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
The presence of polar compounds or water is known to improve the dispersion of silicon dioxide and other mineral fillers in rubber mixes by blocking the silanol groups on their surface. In this study, an examination was made of the influence of the amount
Title: STANDARDISATION OF TEST METHODS FOR ESTIMATING THE UPPER TEMPERATURE LIMIT AT WHICH VULCANISATES CAN BE USED
Page Range: p. T/5-7
Author(s): Im W B; Chung K H
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
In this article, equations are proposed for the estimation of the upper temperature limit of four vulcanised rubbers. The property adopted to characterise the possibility of using vulcanisates is the energy at break, which is defined as the area beneath t
Title: FEATURES OF THE SULPHUR VULCANISATION OF HYDROGENATED NITRILE BUTADIENE RUBBER
Page Range: p. T/9-13
Author(s): Korovina Y V; Shcherbina E I; Dolinskaya R M; Leizeronok M E
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
Hydrogenated NBR provides oil, ozone, fuel, cold and heat resistance in applications such as automotive and oil refining. At present, use is made of peroxide vulcanising systems and the vulcanised rubbers obtained are reported to have certain shortcomings
Title: EFFECT OF QUATERNARY AMMONIUM SALT ON THE VULCANISATION AND PHYSICOMECHANICAL PROPERTIES OF RUBBER COMPOUNDS BASED ON ACRYLATE RUBBER
Page Range: p. T/15-18
Author(s): Rusetskii D V; Shcherbina E I; Dolinskaya R M; Leizeronok M
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
The components of a rubber compound can effect the service properties, and since acrylate rubber has a good resistance to heat, ozone and oil, and because it is cheaper than fluoroelastomers, it was of interest to study the effects of the ingredients of t
Title: USE OF THE MECHANICAL LOSS TANGENT AT DIFFERENT TEMPERATURES FOR ASSESSING THE EVALUATION OF TYRES
Page Range: p. T/19-23
Author(s): Pichugin A M; Stepanova L I; Shcherbakov Y V
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
The characteristics of tread rubbers which affect the main service properties of tyres are determined by their elastic hysteresis properties, which are estimated in the corresponding frequency and temperature ranges. In turn, to asses the elastic hysteres
Title: POLYURETHANE ELASTOMERS BASED ON ISOCYANATE-CONTAINING PREPOLYMER SKU-PFL-100, DIAMET Kh (3,3'-DICHLORO-4,4'-DIAMINODIPHENYLMETHANE), AND DI(DIHYDROXYPROPYL) ESTERS OF DICARBOXYLIC ACIDS
Page Range: p. T/25-28
Author(s): Terent'eva N N; Vasil'eva S Y; Kolyamshin O A; Kol'tsov N I
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
The main crosslinking agent for isocyanate-containing prepolymers used in the production of polyurethane elastomers is Diamet KHh (3,3'-dichloro-4,4'-diaminodiphenylmethane), which possesses carcinogenic properties. In an effort to reduce its toxicity, in
Title: EFFECT OF PLASTICISER TOFINOL ON THE PROPERTIES OF TREAD RUBBERS
Page Range: p. T/29-31
Author(s): Sharipov E N; Mokhnatkin M G; Mokhnatkina E G; Il'yasov R S; Ivanov V B; Savel'chev A P; Okhotina N A
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
Tofinol plasticisers comprises esters/ethers of heterorganic acids and long-chain saturated alcohol, including mixed alky aromatic esters/ethers. They are used to increase the cold resistance of plastics and a number of rubber products based on polar rubb
Title: HYDROCARBON RESIN PIKAR AS A TACKIFIER ENHANCER FOR RUBBER MIXES
Page Range: p. T/33-6
Author(s): Sharipov E N; Mokhnatkina E G; Il'yasov R S; Ivanov V B; Savel'chev A P; Okhotina N A
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
In an effort to find a replacement for pine rosin, hydrocarbon resin Pikar has been developed as a tackifier enhancer for rubber mixes used in tyre production in Russia. For the synthesis of hydrocarbon resin Pikar, use is made of the interaction of by-pr
Title: EFFECT OF PROCESSING FACTORS ON THE TENSILE STRENGTH OF ADHESION CONTACTS BETWEEN COMPONENTS OF THERMOPLASTIC BLENDS BASED ON RUBBER AND POLYOLEFINS AND FILLED WITH RUBBER CRUMBS
Page Range: p. T/37-40
Author(s): Babich V F; Fainleib A M; Svyatchenko G P; Perepelitsyna L N; Lipatov Y S
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
Polymer blends based on polyolefins and rubbers and filled with rubber crumbs are typical blends of thermodynamically incompatible polymers, in which the components of the blend are separated from each other by phase interfaces. The strength of the adhesi
Title: HEAT-SHIELDING AND FIREPROOF MATERIAL FOR POWER MACHINERY CONSTRUCTION
Page Range: p. T/41-42
Author(s): Sharova E A; Krasovskii V N; Smirnova E L; Klochkov V I
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
Details are given of the performance of Polibaz-03, a basalt fabric with an elastomeric heat reflecting coating for use as a heat shielding and fireproof material for power machinery construction such as turbine motors. The product is compared to Siloteks
Title: POWER ANALYSIS OF THE PROCESS OF HIGH-SPEED FRACTURE OF VULCANISED RUBBERS UNDER COMPLEX LOADING
Page Range: p. T/43-45
Author(s): Borisov I E; Borisov E M; Nesiolovskaya T N
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
The comminution of materials by cutting is investigated with respect to the energy consumption of the process. This work analyses a single act of fracture of a rubber specimen using energetic analysis, and in order to increase the efficiency of the proces
Title: LOW-COST RECLAIM OF WASTE FROM MECHANICAL RUBBER GOODS AND TYRE PRODUCTION
Page Range: p. T/47-48
Author(s): Shakhovets S E; Buzid H; Bogdanov V V
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
Research and development work has been carried out at Elast-Tekhnologii LLC on the creation of intensive technology and equipment for the reclaiming of rubber compounds based on general-purpose rubbers and certain special rubber compounds based on butyl r
Title: POTENTIAL FOR THE USE OF IONIC LIQUIDS IN POLYMER CHEMISTRY
Page Range: p. T/49-54
Author(s): Kubisa P
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
Ionic liquids are discussed with reference to their potential for use as environmentally friendly universal solvents. Ionic liquids cover organic salts which are liquid at temperatures close to room temperature. This article assesses the characteristic pr
Title: SYNTHESIS AND STRUCTURE OF NEW COPOLYMERS OF CYCLIC CARBONATES WITH MONOISOCYANATES
Page Range: p. T/55-61
Author(s): Beilin I L; Arkhireev V P; Nefedova M A
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
In this article, the basic possibility of producing copolymers of ethylene carbonate, propylene carbonate and Laprolate-grade oliogocycloester carbonate (tricyclocarbonate) with monoisocyanates is shown. Cyclic carbonates, incapable of homopolymerisation
Title: MODERN FILLERS – AN IMPORTANT FACTOR IN IMPROVING THE COMPETITIVENESS OF COMPOSITES
Page Range: p. T/63-69
Author(s): Bykov E A; Degtyarev V V
File size:
Download the pdf (subscribers only) Buy the pdf (non-subscribers)Journal: International Polymer Science and Technology
Issue Year: ipsat
Volume: 33
Issue No: No.12
Abstract
The variety of fillers available from numerous producers makes it difficult to choose the most appropriate product for a specific applications. This, coupled with the absence of a unified system of quality indices of fillers, and also the use of different